Why the 8-Tooth Gear Matters for Speed
The Gear 8 Teeth #10928 is a small replacement part from Circuit Cubes | Tenka Inc. With only eight teeth, this gear is designed to spin faster than larger gears when driven by the same motor. That makes it a natural choice for builders who want to add speed to their motorized projects.
Because it is a single gear (quantity: 1), you will often combine it with other gears to change the speed and torque of your build. The small size lets it fit into tight spaces where a larger gear would not work.
Building for High Speed with the 8-Tooth Gear
To get the most speed out of the Gear 8 Teeth #10928, pair it with a larger gear on the output axle. The smaller driver gear will rotate the larger driven gear faster than if you used two equal-sized gears. This is a simple way to increase the rotational speed of wheels, fans, or propellers in your Circuit Cubes builds.
For example, you could attach the 8-tooth gear to a motor cube and mesh it with a 24-tooth or 40-tooth gear on an axle that turns a wheel. The result is a vehicle that moves quickly across the floor. Remember that higher speed usually means less torque, so your build may struggle with heavy loads or steep inclines.
Gear 8 Teeth #10928 at a Glance
- Gear - 8 Teeth - #10928: Product: Gear, 8 Teeth. Part number: #10928. Brand: Tenka Inc. Quantity: 1 gear. Category: Parts. This confirms you are getting a single small gear intended as a replacement part for compatible builds. Knowing it is a single piece helps you plan for multi-gear projects.

Gear - 8 Teeth - #10928
Project Idea: Quick-Spin Fan
Build a small desk fan that spins at high speed using the 8-tooth gear.
- Gather your parts: You will need the Gear 8 Teeth #10928, a motor cube (such as the Blink Robot motor or an offset weighted motor cube), a battery cube, a larger gear (e.g., 24-tooth or 40-tooth), an axle, and fan blades or a propeller piece.
- Assemble the gear train: Attach the 8-tooth gear to the motor cube's output shaft. Mount the larger gear on an axle so the teeth mesh smoothly. The larger gear will rotate faster than the motor alone.
- Add the fan blades: Fix the fan blades or propeller to the axle with the larger gear. Connect the battery cube to power the motor. The fan should spin quickly.
- Test and adjust: If the fan wobbles or the gears bind, check that the teeth are aligned and the axle moves freely. Adjust the gear spacing as needed.
Compatibility and Limitations
The Gear 8 Teeth #10928 is listed as a replacement part intended for use with compatible builds. The supplied information does not specify which sets or kits it fits, so you may need to test it with your existing Circuit Cubes parts. The gear is made by Tenka Inc. and is sold as a single unit.
Because this is a small gear with few teeth, it may not be ideal for applications that require high torque or heavy lifting. For those projects, a larger gear (such as the 16-tooth or 40-tooth) would be a better choice. Always check that the gear teeth match the pitch of your other gears to avoid slipping or damage.


