What the Offset Weighted Motor Cube Does
The Offset Weighted Motor Cube (also called a vibrating motor) adds a rattling, shaking motion to your builds. Its motor shaft spins at high speed, and because the small weight on the end is off-center, centrifugal force creates vibration. This is not a spinning motor - it is designed to make things wobble, shake, or move in a jerky way.
This cube is one component in a circuit. On its own it does nothing. You need a battery cube to power it, and you can add a switch to turn the vibration on and off. A LED cube can also be included to show when the circuit is live.
What the Supplied Information Confirms
- Offset Weighted Motor Cube - AKA Vibrating Motor: The motor shaft rotates at a high speed and because the small weight at the end of the shaft is not centered the centrifugal force causes it to vibrate and rattle. This explains exactly how the cube creates vibration - it is not a fault, it is the intended behavior. Knowing this helps you decide where to place it in a build.

Offset Weighted Motor Cube - AKA Vibrating Motor - Offset Weighted Motor Cube - AKA Vibrating Motor: Seamless circuit connectivity (no soldering). Compatible with major brick brands. You can click the cube directly onto brick-built structures without any wiring or soldering. It works with standard brick studs, so no special adapter is needed.
- Offset Weighted Motor Cube - AKA Vibrating Motor: Safety-tested & approved for ages 8+. The cube is designed for children aged 8 and up, with no small loose parts that pose a choking hazard for that age group.
Building with the Offset Weighted Motor Cube
Start by gathering the other cubes you need: a battery cube and a switch cube. The Offset Weighted Motor Cube does not include a power source or control.
Connect the cubes in a simple circuit: battery cube → switch cube → Offset Weighted Motor Cube. The order matters because the switch controls the flow of power to the motor.
Attach the cube to a brick-built base or vehicle. Because it vibrates, a solid connection prevents it from shaking loose. Use bricks that grip the cube's studs firmly.
Add a LED cube anywhere in the circuit if you want a visual indicator that the motor is receiving power. The LED will light when the switch is on.
- Connect the cubes: Snap the battery cube, switch cube, and Offset Weighted Motor Cube together in that order. The cubes click onto each other using standard brick studs.
- Secure the motor cube: Attach the motor cube to your build using bricks. Because it vibrates, a loose fit will cause it to rattle off. Use plates or bricks that surround the cube's base.
- Test the vibration: Turn on the switch. The motor cube should vibrate and rattle. If it does not, check that all cubes are fully connected and the battery cube has power.
What to Expect from the Vibration
The vibration is strong enough to make a small brick vehicle shake or a simple figure wobble. It will not power wheels or gears - that is a job for a geared motor cube. The Offset Weighted Motor Cube is best for effects like a shaking ground, a vibrating robot, or a creature that moves in a jerky, unsteady way.
The cube is compatible with major brick brands, so you can use it with your existing brick collection. No special adapters or soldering are needed.


