Back to Blog
Comparisons 2026-11-20 Circuit Cubes | Tenka Inc. 0 views

RGB LED Cube vs Potentiometer Cube: Which to Add First?

RGB LED Cube vs Potentiometer Cube: Which to Add First?

Deciding between the RGB LED Cube and the Potentiometer Cube for your Circuit Cubes builds? Compare their functions, see how each changes your circuit, and find out which add-on cube suits your next project best.

What Each Cube Does

The RGB LED Cube and the Potentiometer Cube are both add-on cubes that change how your circuit behaves, but they serve very different purposes. The RGB LED Cube lets you control the color of light in your build, while the Potentiometer Cube acts as a dimmer switch for the whole circuit, affecting brightness or motor speed.

Neither cube powers a circuit on its own — you still need a battery cube and, for the RGB LED Cube, a switch cube to turn the colors on and off. The Potentiometer Cube, on the other hand, works as a variable resistor and doesn't require a separate switch to change its effect.

At a Glance

  • RGB LED Cube: The Red-Green-Blue (RGB) LED has three different LEDs in one bulb. Use the small switches to turn on each of the different LEDs, and control the red, green, and blue lights. This cube lets you mix colors to create purple, teal, or yellow light, making it ideal for adding visual effects to your builds.
    RGB LED Cube
    RGB LED Cube
  • Potentiometer Cube: The Potentiometer Cube is a variable resistor, like the dimmer switch for your lights at home. The resistance is from 0 to 200 Ohms. Turning the dial changes the resistance, which reduces power to the rest of the circuit — useful for dimming an LED or slowing a motor without swapping parts.
    Potentiometer Cube
    Potentiometer Cube

How They Affect Your Circuit

Add the RGB LED Cube to a circuit, and you get three color channels you can switch on or off independently. The supplied information confirms you can mix red, green, and blue to produce purple, teal, and yellow light. This cube is purely an output — it doesn't change how other components behave.

The Potentiometer Cube works differently: it sits in the circuit and consumes some of the power as heat. As you rotate the dial, the resistance increases, leaving less power for the rest of the circuit. The result is a dimmer LED or a slower motor, depending on what you've connected. This cube gives you real-time control over the behavior of other components.

Which Should You Add First?

  • Pick the RGB LED Cube first if…: You want to add colored lighting to a static build or a vehicle. It works well as a finishing touch — you can switch colors to match a theme or create a simple light show. It's also a good introduction to how separate switches control different parts of a circuit.
  • Pick the Potentiometer Cube first if…: You're building something that moves and you want to control its speed without rebuilding the circuit. The dial gives you smooth adjustment from full speed down to a crawl. It also teaches how a variable resistor affects the whole circuit, which is a useful concept for later STEM projects.

What the Supplied Information Doesn't Cover

The catalog doesn't specify how many RGB LED Cubes or Potentiometer Cubes you can chain in a single circuit, nor does it list the exact current draw of the RGB LED. If you plan to use both cubes together, you'll need to test with a battery cube to see if the combined load still powers your motor or other components adequately.

Both cubes are safety-tested for ages 8+ and compatible with major brick brands, so they fit into existing builds without soldering or special adapters.

Related Articles

Customer Service
Home
Products
Cart
Profile