Voltar ao blog
Guias de Compra 2026-11-15 Circuit Cubes | Tenka Inc. 1 visualizações

Brick with Holes 1 x 12 #3895: Long Beams in Cube Builds

Brick with Holes 1 x 12 #3895: Long Beams in Cube Builds

A practical look at the 1 x 12 brick with holes #3895: what it offers, how many to order for long spans, and when a Technic beam suits your build better.

What the 1 x 12 brick with holes actually gives you

The Brick with Holes - 1 x 12 - #3895 is a single building brick part from Tenka Inc., listed under Parts. Its 1 x 12 footprint makes it one of the longer single-piece bricks in the catalog, and the holes along its length give you anchor points for pins, axles, or other connectors in a Circuit Cubes build.

That combination matters when you need a straight, rigid span without stacking several shorter bricks. A single 1 x 12 piece keeps the line true and reduces the number of seams that can shift under motor vibration. If you are deciding between this brick and a Technic beam, the choice usually comes down to whether you want studs on top for standard bricks or a cleaner beam profile for pin-based connections.

Catalog details for #3895

  • Brick with Holes - 1 x 12 - #3895: Brick with Holes, 1 x 12, #3895; quantity: 1; brand: Tenka Inc.; category: Parts. You are buying one brick per order, so plan the count against the number of long spans in your build rather than assuming a multipack.
    Brick with Holes - 1 x 12 - #3895
    Brick with Holes - 1 x 12 - #3895

Brick with holes vs. Technic beam: which fits your build

Both parts can create a long, hole-lined span, but they solve different problems. Use this comparison to pick the right one before you order.

  • Choose the 1 x 12 brick with holes when...: You need studs on top to attach standard bricks, plates, or Circuit Cubes components that rely on a studded surface, while still having holes for pin connections along the side. It is the more flexible choice for mixed builds that combine classic brick construction with pinned joints.
  • Choose a Technic beam when...: You want a beam that is primarily a pin-and-axle frame with a consistent cross-section. Beams are typically better for pure mechanical linkages where studs would get in the way or add unnecessary height.
  • Choose shorter bricks with holes when...: Your span is under 12 studs or you need to follow a curve or corner. A 1 x 12 brick is rigid, so it will not bend around a turn; shorter pieces let you step the line.

How many 1 x 12 bricks should you order?

There is no single correct number, but you can estimate from the long straight runs in your build. Count each place where you need an uninterrupted 12-stud span with holes, then add one or two spares for redesigns or replacements.

  • Count long spans, not total length: A 24-stud run can be one 1 x 12 brick plus other structure, or two 1 x 12 bricks end to end. Two pieces create a joint in the middle, which may be fine or may be a weak point depending on how you pin it.
  • Add spares for motorized builds: Vibration and repeated assembly can loosen connections over time. A spare brick lets you replace a worn or damaged piece without waiting for a new order.
  • Check your pin supply first: The holes in this brick are only useful if you have pins or axles to go through them. If you are short on connectors, order those alongside the brick.

What the catalog does not tell you

The supplied product record confirms the part number, size, quantity, brand, and category, but it does not include a listed age range, compatibility statement, or care instructions for this brick. That means you should not treat this page as a source for those details. If age suitability or specific compatibility with a particular kit is critical to your purchase, check the kit's own documentation or contact Circuit Cubes | Tenka Inc. directly before ordering.

The record also does not list a pack size beyond quantity 1, so do not assume multiple bricks are included. Order the exact number you need based on your span count.

A quick pre-order check for long-beam builds

Run through these steps before you add the brick to your cart. They take a few minutes and help you avoid a second order.

  1. Sketch the long runs: Mark every straight section that needs holes along its length. Note whether each run needs studs on top or a clean beam profile.
  2. Decide brick vs. beam per run: Use the comparison above. Mixed builds often need both, so list each part separately.
  3. Count connectors: Check that you have enough pins or axles for the holes you plan to use. The brick itself does not include connectors.
  4. Order one spare: A single spare 1 x 12 brick is cheap insurance for a redesign or a worn piece.

Artigos relacionados

Customer Service
Início
Produtos
Carrinho
Perfil