Back to Blog
How-to Guides 2026-11-15 Circuit Cubes | Tenka Inc. 0 views

Brick with Holes 1 x 4 #3701: Small Piece, Big Build Uses

Brick with Holes 1 x 4 #3701: Small Piece, Big Build Uses

A single 1 x 4 brick with holes can anchor pins, extend frames, and tidy small Circuit Cubes builds. Here are practical ways to use #3701 and what to check before you buy.

What this small brick actually does

The Brick with Holes 1 x 4 #3701 is a single building part: a 1 x 4 brick with holes, identified by part number 3701. It is not a motor, a plate, or a connector by itself. Its value comes from the holes, which give you a place to pass a pin or axle through a standard brick footprint.

That makes it a useful problem-solver in Circuit Cubes builds where you need a pin connection but do not want to rebuild a whole section. You can add a hinge point, extend a frame, or create a small mounting tab without changing the surrounding structure.

Catalog details for #3701

  • Brick with Holes - 1 x 4 - #3701: Brick with Holes, 1 x 4, part number #3701; quantity included: 1. You receive one brick per order, so plan how many pin points your build needs before buying.
    Brick with Holes - 1 x 4 - #3701
    Brick with Holes - 1 x 4 - #3701
  • Brick with Holes - 1 x 4 - #3701: Size: 1 x 4. The four-stud length gives you a short span for compact frames or extensions without adding bulk.

Practical ways to use a 1 x 4 brick with holes

  • Add a pin hinge to a small frame: Use the holes to create a pivot or attachment point on a compact frame. Because the brick is only 1 x 4, it fits into tight spots where a longer brick with holes would crowd the build.
  • Extend a beam or arm by one short segment: When you need just a little more reach for a sensor, wheel mount, or decorative arm, this brick can act as a short extension. Check that the added length does not make the structure tip or flex.
  • Create a removable mounting tab: A single 1 x 4 brick with holes can serve as a small tab that you pin to a larger assembly. That makes it easier to remove or reposition a component without dismantling the main build.
  • Tidy up pin connections in a compact mechanism: If a mechanism needs a pin joint in a tight area, this brick gives you a defined hole without forcing a larger frame. Keep the joint movement clear of surrounding bricks so the pin does not bind.

How to plan a build that uses #3701

Start by identifying the exact point where you need a pin connection. Place the 1 x 4 brick with holes so the holes face the direction your pin or axle will travel. Because the catalog does not list compatible pin types or axle sizes, test the fit with the parts you already have before finalizing the build.

Next, check the surrounding structure. A 1 x 4 brick is short, so it may not bridge a wide gap on its own. If the brick needs to span a distance, support it with plates or additional bricks underneath. Also confirm that the holes are not blocked by neighboring parts once the brick is attached.

Finally, treat the brick as a single part, not a set. The catalog lists quantity included as 1, so if your design needs two or more pin points, order the number of bricks you need. There are no supplied care or operating instructions for this piece, so handle it like any small building part and keep it away from young children who still put pieces in their mouths.

When a 1 x 4 brick with holes is the right choice

  • Choose #3701 when: You need a short, compact pin point in a tight space, or you want to add a single hinge or mounting tab without changing a larger assembly.
  • Consider a longer brick with holes when: Your build needs to span a wider gap or support more than one pin point along the same line. A longer brick can reduce the number of separate pieces, but it also takes up more room.
  • Skip it when: Your connection does not involve a pin or axle through a hole. In that case, a standard brick or plate may be simpler and less expensive.

What to check before you order

The catalog lists this brick at USD 0.15, with a comparison price of USD 0.20. That makes it an inexpensive part to keep on hand for small adjustments. Because each order includes one brick, count your pin points first: a single mechanism might need two or three of these bricks if you are adding multiple hinges or mounting tabs.

The supplied information does not confirm which specific pins, axles, or other parts fit the holes, so avoid assuming compatibility with a particular connector. If you are unsure, test with the parts you already own before buying in quantity. The catalog also does not list an age range or safety certifications for this individual part, so use your judgment and follow the age guidance that came with your main Circuit Cubes set.

Related Articles

Customer Service
Home
Products
Cart
Profile