Back to Blog
How-to Guides 2026-11-14 Circuit Cubes | Tenka Inc. 0 views

NO/NC Switch Cube: Wiring Basics for Beginner Builders

NO/NC Switch Cube: Wiring Basics for Beginner Builders

Learn how the NO/NC Switch Cube works, how to wire it into a Circuit Cubes build, and when to choose normally open or normally closed mode.

What the NO/NC Switch Cube Does

The NO/NC Switch Cube is a control component for your Circuit Cubes builds. It lets you choose between two switching behaviors: Normally Open (NO) and Normally Closed (NC). In NO mode, the circuit stays open until you press the lever arm, which closes it and lets power flow. In NC mode, the circuit stays closed until you press the lever arm, which opens it and cuts power.

This switch is just one part of a circuit. To bring a creation to life, you also need a battery for power, a motor to make it move, an LED to light it up, and other components as needed. The switch gives you control over when those parts activate.

Normally Open vs Normally Closed: Which Mode to Use

Choose NO mode when you want something to turn on only while the lever is pressed. For example, a build that moves when you press a button and stops when you release it. Choose NC mode when you want something to stay on until you press the lever to turn it off, like a safety stop or a build that runs continuously until interrupted.

The slide switch on the Cube lets you select the mode. Make sure the switch is fully in the NO or NC position before you start building.

How to Wire the Switch Cube into Your Build

Follow these steps to add the switch to a simple circuit. Remember that the switch is just one part; you will need a battery, a motor or LED, and connecting wires (sold separately).

  1. Step 1: Gather your components: You will need the NO/NC Switch Cube, a battery cube, a motor or LED cube, and clip wires. The switch does not include these parts.
  2. Step 2: Set the switch mode: Slide the switch to NO or NC depending on how you want your build to behave. Refer to the descriptions above if you are unsure.
  3. Step 3: Connect the battery to the switch: Use a clip wire to connect one terminal of the battery cube to one terminal of the switch cube. The switch has no polarity, so either terminal works.
  4. Step 4: Connect the switch to your output: Use another clip wire to connect the other terminal of the switch to one terminal of your motor or LED. Then connect the remaining terminal of the motor or LED back to the battery to complete the circuit.
  5. Step 5: Test the circuit: Press the lever arm. In NO mode, the motor or LED should activate when pressed and stop when released. In NC mode, it should be active by default and stop when pressed. If nothing happens, check that all connections are secure and the battery is charged.

Switch Cube Details

  • NO/NC Switch Cube: Normally Open (NO) and Normally Closed (NC) mean just what they say. This helps you predict how the switch will behave in your circuit.
    NO/NC Switch Cube
    NO/NC Switch Cube
  • NO/NC Switch Cube: When the slide switch is moved to the NO (Normally Open) position, pressing down on the lever arm closes the circuit. In NO mode, the switch acts like a push-to-activate button.
  • NO/NC Switch Cube: In the NC (Normally Closed) position, the circuit will be closed until you press down the lever arm to open it. In NC mode, the switch works as a push-to-stop control.
  • NO/NC Switch Cube: The NO/NC Switch is just one part of a circuit. You need additional components like a battery, motor, or LED to complete your build.
  • NO/NC Switch Cube: Seamless circuit connectivity (no soldering) You can connect components easily without special tools.
  • NO/NC Switch Cube: Compatible with major brick brands The switch integrates with your existing brick collection.
  • NO/NC Switch Cube: Safety-tested & approved for ages 8+ Suitable for beginners and kids aged 8 and up.

Tips for Successful Wiring

Keep your wiring neat and secure. Loose connections can cause intermittent behavior. If your build uses multiple switches, label them so you remember which mode each is in. Always double-check the switch position before powering on.

Remember that the switch cube is not a power source; it only controls the flow of electricity. Make sure your battery is properly connected and charged.

Troubleshooting Common Issues

If your circuit does not work, first verify that the switch is in the correct mode. In NO mode, the circuit is open until pressed; if you expect it to be on by default, you may have the switch in the wrong position. In NC mode, the circuit is closed until pressed; if it is not working, check that the lever is not stuck down.

Also check all clip connections and ensure the battery is not depleted. If using a motor, make sure it is not jammed.

Related Articles

Customer Service
Home
Products
Cart
Profile